Information on how to use the MillenVPN application is available here.
*Here you can find instructions on how to install MillenVPN macOS application.
(1) Click on MillenVPN in the application.
(2) Click on it and a pop-up will appear to run MillenVPN.
Please confirm the contents and click [Open].
(3) MillenVPN application has been launched.
Please enter the following information from the "Welcome to MillenVPN" email sent to you when you signed up:
・User Name
・Password
Please enter the above two information and click Login.
*Login information for the application is also available on My Page.
(4) Change the connection point.
Click [Server List].
(5) Please select your desired connection destination.
*If you select the fastest server, the country with the fastest connection speed will be automatically selected.
(6) Change the connection destination above or click "Connect" to start the connection.
Depending on the country you have requested, it may take some time for the connection to be established.
(7) When the following screen is displayed, the connection is complete.
Once connected, the country and global IP address of the destination country will be displayed.
MillenVPN Configuration
Click on MillenVPN, which appears in the upper left corner of the computer screen, to display the various menus.
Overview
⇒Check the current version of the application.
You can go to the Settings
⇒Settings page.
Setting item: protocol
⇒The protocol can be changed.
To change to WireGuard, you will need to respond to the following page.
▼ How to set up network extensions to connect with WireGuard [Mac] https://support.millenvpn.jp/3215
If you are making changes for the first time, click "Allow" when the Add Configuration screen appears during the change.
WireGuard
⇒Provides a very fast VPN.
Not available on networks where UDP is not available.
▪ IKEv2 (recommended setting)
⇒ Very fast protocol, providing high stability and security.
May not be available on all platforms.
・IPSec
⇒ Widely used protocol that provides stable security.
May not be available on all platforms.
Configuration item: kill switch
⇒Enable to prevent communication with a real IP address if the VPN connection is disconnected.
Setting item: on demand
⇒When set to ON, the VPN connection will continue even if the Millen VPN application is closed.
Setting item: System startup
⇒When set to ON, MillenVPN application will automatically log you in when you log in to your Mac.
Setting item: Hide on startup
⇒When set to ON, the window will be hidden when MillenVPN application is started.
Setting item: MillenVPN at startup
Do not connect automatically (default setting)
⇒Do not make VPN connection when MillenVPN application is launched.
Connect to the last server you connected to
⇒Connect to the last server you connected to when you start MillenVPN application.
Connect to the fastest server
⇒Automatically selects the server with the fastest communication when MillenVPN application is launched and connects to the VPN.
Connect to the fastest server in the selected country
⇒Automatically selects the server with the fastest connection in the country selected on the settings screen and connects to the VPN.
Update server information
⇒Update server information. This function is available when the server is not displayed.
Hide
⇒Hide the MillenVPN app window.
You can show it again by clicking on the window app icon.
Hide other windows
⇒Hide all windows except the MillenVPN app.
Show all windows
=> only enabled if "Hide other windows" is used.
Show all windows again except MillenVPN app.
Logout
⇒ Log out of the application.
Exit
⇒ Complete the application.