How to Use macOS Apps
Here's how to use the MillenVPN/macOS app.
※How to Install the MillenVPN macOS AppHereis posted on.
(1) After obtaining the installer, move MillenVPN to the Applications folder in the following screen.
(2) Click on MillenVPN in the application.
(iii) Click to run MillenVPN and a pop-up will appear.
Please check the contents and click "Open".
(4) MillenVPN application has been launched.
As stated in the [Welcome to MillenVPN] email sent upon contract activation
・Username
・Password
Please enter the two items above and click Login.
※Login information for the appMy Pageis also stated.
(5) Change the connection point. Click [Server List].
(6) Please select the desired connection point.
*If you select the fastest server, the country with the fastest transmission speed is automatically selected.
Favorite function
If you click on the star to the left of a server, the corresponding server will appear at the top the next time you open the server list.
(vii) The following extension pop-up may appear when you click on the server.
*In the latest version, the default protocol is WireGuard and the following settings are required.
▼How to Configure Network Extensions for Connecting with WireGuard [Mac] https://support.millenvpn.jp/3215
For OpenVPN, the following screen will appear.
[Click "Allow.
If other than OpenVPN, the VPN Configuration Permissions screen will appear.
[Click "Allow.
(8) When the following screen is displayed, the connection is complete.
The country and global IP address of the connection destination are displayed.
Settings
Clicking the MillenVPN icon displayed in the upper-left corner of your computer screen will display various menus.
Overview
⇒You can check the current app version.
Settings
You can go to the settings screen.
Settings > General
Settings Item: System Startup
Automatic application launch for MillenVPN apps when logging into a Mac.
⇒If you set this to "ON," the app will launch automatically when you log in to your Mac.
Hides the application window when the application is launched.
⇒If you set this to "ON," the app window will be hidden when the app launches.
Setting item: At startup
・Do not connect automatically (default setting)
⇒The MillenVPN app will not establish a VPN connection upon launch.
・Connect to the last server you connected to
⇒When you launch the MillenVPN app, it connects to the VPN using the last server you connected to.
・Connect to the fastest server
⇒Upon launching the MillenVPN app, it automatically selects the server with the fastest connection and establishes a VPN connection.
・Connect to the fastest server in the selected country
⇒Automatically selects the fastest server within the countries you choose in the settings screen and connects to the VPN.
*Depending on your Internet connection—for example, if it takes a while for the Wi-Fi connection to complete after the device starts up—the automatic connection at startup may not work properly.
If you repeatedly experience issues with automatic connection, please follow the steps below.
- Turn off "Launch apps automatically when logging in to your Mac" under "System Startup"
- Please manually launch the MillenVPN app and establish a VPN connection.
Setting item: Security
kill switch
Enabling this prevents communication using your real IP address if the VPN connection is disconnected.
Threat Protection Features
⇒ Enabling this feature will block ads, trackers, and malicious websites when you're connected to a VPN.
This feature is available only when connected via WireGuard.
on demand
⇒If you enable this, the VPN connection will be established automatically when the application launches.
Double Hop
⇒ Once enabled, you'll be able to use a VPN connection that routes through two servers.
Once enabled, two servers—an "inbound" and an "outbound" server—will be available for selection on the Server tab, and the server selected as the "outbound" server will be the destination IP address.
This feature is available only when connected via WireGuard.
Setting: Hide at startup
⇒When set to ON, the window will be hidden when the MillenVPN app launches.
Configuration > Protocol
You can modify the protocol.
・WireGuard
⇒Provides extremely fast VPN service.
This feature is unavailable on networks where UDP is not supported.
・IKEv2 (Recommended setting)
⇒ It provides high stability and security with an extremely fast protocol.
This feature may not be available on some platforms.
・IPSec
Provides stable security through widely used protocols.
This feature may not be available on some platforms.
・OpenVPN
⇒Provides the highest level of security.
Due to enhanced security, it may be slower than other protocols.
Even when other protocols cannot be used due to firewall restrictions,
OpenVPN may be available.
＜OpenVPN設定＞
OpenVPN Driver
⇒This is the setting of the "Connection Aids" to correctly link the Mac and MillenVPN when using OpenVPN.
Normally, this is set automatically during installation, but the following buttons are used in case of connection problems.
Repair: Reinstall the connection aids, try if you can no longer connect via OpenVPN.
Uninstallation: Remove the connection assistance tool.
Repair DNS: Reset DNS settings; try this if your website no longer appears during or after a VPN connection.
Settings > Split Tunneling
⇒A domain or an Internet connection that is not protected by a VPN connection during a VPN connection,
You can specify the application.
*Only domain (URL, etc.) can be specified. *Only domain (URL, etc.) can be specified.
Update server informationbe just about to
⇒Update server information. This feature is for when servers are not displayed.
Hide
⇒Hide the MillenVPN app window.
You can display it again by clicking the window app icon.
cover up the other side
⇒Hide all windows except the MillenVPN app.
Show all
⇒ This option is enabled only when "Hide Other Windows" is selected.
Display other windows besides the MillenVPN app.
Logout
⇒ Log out of the app.
End
⇒Exit the app.